Improved method for the determination of sulfur components in natural gas

Determination of trace concentrations of sulfur components in natural gas is a true analytical challenge. Only analytical procedures based on gas chromatography can meet the sensitivity and accuracy requirements dictated by environmental regulation institutions and modern chemical industry. In the present contribution the sample pretreatment and chromatographic separation steps have been evaluated and optimized based on the use of a flamebased sulfur chemiluminescence detector (SCD) for target compound detection. The proposed instrument consists of a programmed temperature vaporizing (PTV) injector employing a liner packed with Chromosorb 104, a 4 μm thick film apolar column and a flame-based SCD. Using a 13 mL sample loop the detection limit achievable with the new method is 3 μg S/m³. The precision of replicate measure. ments is generally in the range of 5–15% relative standard deviation. Lower detection limits can be achieved by preconcentrating larger sample volumes, e.g. 100 mL.     

In-situ deactivation of packed columns for SFC

Residual adsorptive activity of reversed phase (RP) column packings used in supercritical fluid chromatography (SFC) can be significantly reduced by a dynamic in-situ silanization with diphenyltetramethyldisilazane (DPTMDS). RP-materials thus deactivated were characterized both chromatographically and by solid-phase ²⁹Si NMR.     

Separation of ortho-substituted tetraphenylporphyrins by preparative HPLC

Summary A method for the separation of substituted tetraphenylporphyrins by preparative liquid chromatography is reported. The quality of the columns formed by axial compression of various stationary phases is tested.     

溶胶-凝胶柠檬酸三丁酯毛细管气相色谱柱的研究

柠檬酸三丁酯是浅黄色的液体，可作为固定相，文献记载它被制备成色谱柱的最高使用温度为150℃。鉴于最高使用温度低的限制，柠檬酸三丁酯作为色谱固定相时，一些分子量大的化合物不能使用该柱分析。本文将其作为固定相用溶胶-凝胶法制备毛细管气相色谱柱，并在色谱柱上初步研究了一系列低沸点有机物的分离和保留行为，发现其对醇类、胺类、芳烃等有很好的分离效果。同时使用该种方法制得的毛细管柱能承受的最高温度现为240℃，这对提高柠檬酸三丁酯的利用价值有较好的意义。     

程序涂渍柱“柱效能程序效应”的研究

本文从理论上给出程序柱“柱效能程序效应”的概念并导出了函数关系式,通过计算机可计算柱效能程序效应与柱内各变量之间的关系,实践证明实验数据的变化趋势与理论数据相符。     

Study on the thermal stability of a chiral stationary phase coated on capillaries for GC

A chiral stationary phase prepared by bonding L -valine-t-butylamide to XE-60 has been coated on glass and metal capillaries. The performances of the chiral glass and metal columns were equivalent to those of commercial fused silica capillary columns. The thermal stability of the glass column was examined up to 280°C. It was found that no appreciable change in separation factor (α value) was observed up to 230°C. The α values gradually decreased between 240 and 260°C, and enantiomer separation was no longer achieved at 280°C. It was concluded that the allowable upper limit temperature of the chiral stationary phase is between 230 and 240°C in the isothermal mode, and ca 260°C in temperature-programmed mode.     

Effect of temperature on the mechanism of retention of fullerenes in liquid chromatography using various alkyl bonded stationary phases

Summary The temperature-dependency of the separation of fullerenes in liquid chromatography (LC) has been examined using various alkyl bonded stationary phases. It has been found that a maximum retention temperature exists with long alkyl bonded stationary phases, whereas there is no similar effect with the newly synthesized alkyl bonded phases which have two phenyl groups at the base of the bonded phase. The interpretation of the retention behavior of fullerenes in the low temperature region on alkyl bonded stationary phases is discussed using information obtained by CP-MAS solid-state NMR spectroscopy and LC.     

On-column polymer-imbedded graphite inlet electrode for capillary electrophoresis coupled on-line with flow injection analysis in a poly(dimethylsiloxane) interface

A method for coupling an electrophoretic driven separation to a liquid flow, using conventional fused-silica capillaries and a soft polymeric interface is presented. A novel design of the electrode providing high voltage to the electrophoretic separation was also developed. The electrode consisted of a conductive polyimide/graphite imbedded coating immobilized onto the capillary electrophoresis (CE) column inlet. This integrated electrode gave the same separation performance as a commonly used platinum electrode. The on-column electrode also showed good electrochemical stability in chronoamperometric experiments. In addition, with this electrode design, the electrode position relative to the inlet end of the CE column will always be constant and well defined. The on-line flow injection analysis (FIA)-CE system was used with electrospray ionization (ESI)-time of flight (TOF)-mass spectrometry detection. The preparation of the PDMS (poly(dimethylsiloxane)) interface for FIA-CE is described in detail and used for initial tests of the on-column polymer-imbedded graphite inlet electrode. In this interface, a pressure-driven liquid flow, a make up CE electrolyte and a CE column inlet meet in a two-level cross (95 microm ID) in the PDMS structure, enabling independent flow characterization.     

Analysis of Seven Herbicides by Gas-Liquid Chromatography

Simutaneous analysis of seven commonly used herbicides, 2,4-D methyl ester, 2,4-D methyl ester, 2,4,5-T methyl ester, silvex methyl ester, ramrod, CIPC and DEF, by gas-liquid chromatography with an electron capture detector was attempted. Two packed columns (which are generally used for the analysis of chlorinated pesticides) and two chemically bonded fused silica capillary columns were used for the analysis. When the packed columns were used, ramrod always interfered with the analysis of 2,4-D methyl ester and/or silvex methyl ester. Complete separation with reasonable analysis time can be achieved using one of the chemically bonded fused silica capillary columns.